A bathroom exhaust fan works by pulling air out of the room. For every cubic foot it pushes out, one has to come back in from somewhere. With the door open, that's easy. With the door shut, the air has to squeeze through whatever gaps are left, and if there aren't enough, the fan moves far less air than its rating suggests.
Signs your bathroom is short of air
- The mirror stays fogged long after a shower, even with the fan running.
- The door is hard to open, or swings shut on its own, while the fan is on.
- You can hear the fan whistling or straining when the door is closed.
- There's little or no gap under the door, often because of a new floor, tiles or a threshold.
Three ways to let air in
Undercut the door
Trimming the bottom of the door leaves a gap for air. It's invisible, but a gap that's big enough to feed a fan can let in light and noise along the floor, and it only works if the floor on both sides is flat.
Fit a door vent
A louvered vent in the lower part of the door gives a fixed, predictable opening without changing the door's fit in its frame. Air comes in low, near the floor, and the fan draws it across the room towards the ceiling. The Internal Vents door vent needs a 17 × 3⅛ in cut-out and fits doors 1 to 1¾ in thick.
Add a transfer grille in the wall
A pair of grilles through the wall does the same job without touching the door, but it means opening up drywall and working around studs, pipes and wiring.
Will a vent fix a weak fan?
Only if the problem is air supply. If the fan is undersized, the duct is long or crushed, or the outlet is blocked, a vent won't make up for it. A quick test: run the fan with the door shut, then open the door a few inches. If the fan gets noticeably stronger or louder, it was starved of air, and a vent will help.
Where to put it
Low on the door, a few inches above the bottom rail. That keeps it out of sight and gets replacement air moving across the floor, where it does the most good.